The Engage Cable is a continuous length of 2.5 mm2 (12 AWG) cable with pre-installed connectors for Enphase Microinverters. The cable is handled like standard outdoor-rated electrical wire, allowing it to be cut, spliced and extended as needed. The Engage Accessories complement the Engage Cable and give it the ability to adapt to any installation.
Compatible with enphase micro inverter M215 and M250.
4 Sets of Renogy Enphase 240VAC AWG12 Portrait Trunk Cable
Quick installation, large branch capacity
Simple design, no additional cables
No high voltage DC, reduced fire risk
Connector Spacing: 1.025 m (40″”)
PV Module Orientation: Portrait
Cable Temperature Rating: 90°C (194°F) wet/dry
Cable Insulator Rating: THWN-2
UV Exposure Rating: UL 746 C, F1
Conductor Size: 12AWG
Compliance: IEC 60529 IP67, CAN/CSA 22.2 No. 21, 182.3, UL 486A/B, 514C, 6703, and 9703
Cable rating: TC-ER
Cable Diameter: 1.25 cm (0.49”)
Minimum bend radius: 12 cm (4.75”)